Maintaining the proper pH levels in your pool is crucial for keeping the water clean and clear. If your pool's pH levels are too high, you may need to use a pH decreaser to bring them back into balance. Follow these simple steps to ensure your pool stays sparkling all season long.
Test Your Pool's pH Levels.
Before using a pH decreaser, it's important to test your pool's pH levels using a pool testing kit. The ideal pool pH range is between 7.2 -7.8. If your pH levels are above 7.8, you will need to use a pH decreaser to bring them back into the proper range. It's important to note that if your pH levels are below 7.2, you will need to use a pH increaser instead.
Pool Maxx pH Down lowers the pH level and stabilizes the pH. This pH decreaser helps to reduce the consumption of chlorine and other pool maintenance solutions which reduces skin irritation, helps prevent scale formation on surfaces & preserves pool and equipment.
Determine the Amount of pH Decreaser Needed.
Once you have tested your pool's pH levels and determined that you need to use a Pool Maxx pH Down, it's time to calculate the amount needed. The amount of pH decreaser needed will depend on the size of your pool and how much you need to lower the pH levels. Refer to the Pool Product Calculator instructions on the Pool Maxx pH Down for guidance on how much to use. It's important to add the pH decreaser slowly and in small amounts, testing the pH levels frequently to avoid over-correcting and causing further imbalances.
Add the pH Decreaser to Your Pool.
Once you have calculated the amount of Pool Maxx pH Down needed, it's time to add it to your pool. Begin by turning on your pool's circulation system to ensure the pH decreaser is evenly distributed throughout the water. Slowly pour the pH decreaser into the pool, starting at the deep end and working your way towards the shallow end. Be sure to pour the pH decreaser in small amounts, waiting a few hours before testing the pH levels again. Remember to always follow the instructions on the Pool Maxx pH decreaser and wear protective gloves and eyewear when handling it.
Wait and Test Again.
After adding the Pool Maxx pH Down to your pool, it's important to wait a few hours before testing the pH levels again. This allows the pH decreaser to fully distribute throughout the water and take effect. Use a pool testing kit to check the pH levels and adjust as necessary. If the pH levels are still too high, you may need to add more pH decreaser and repeat the process. Remember to always follow the instructions on the product and take necessary safety precautions when handling chemicals. With a little patience and diligence, you can keep your pool's pH levels in check and enjoy crystal clear swimming all season long.
Repeat as Necessary.
Balancing your pool's pH levels is an ongoing process, especially during the summer months when the pool is being used frequently. It's important to regularly test the pH levels and adjust as necessary to prevent cloudy water and potential damage to the pool's equipment. Repeat the process of adding pH decreaser and wait a few hours before testing until the pH levels are within the recommended range. Remember to also maintain proper chlorine levels and regularly clean the pool to ensure optimal swimming conditions.
WHERE CAN YOU GET POOL MAXX PH DOWN?
1. Pool Maxx pH Down is available on our website, with a special offer of 15% using coupon code POOLMAXX15 at checkout.
2. Available on Flipkart & Amazon.
Need Help?
Connect with a Pool Maxx Care Specialist.